The meter is a high performance, high accuracy, 3 3/4-digit, 32mm digit high by LCD displaying meter. |
The function includes DCV, ACV, DCA, ACA, resistance ,capacitance, frequency, temperatureŁ¬duty cycle measurement, triode, diode and continuity test. |
Also with the function of unit signal displaying ,relative value measuring ,auto range/ manual range switch ,auto power off and warning function etc. |
Content | Description |
---|---|
Display: | 3 3/4digit LCD with a max readings of 3999, Automatic negative polarity indication., |
Measuring method: | Dual-slop integrating A/D converter system. |
Sampling rate: | Approx. 3times/second. |
Over range indication: | "OL" display. |
Low battery: | The "i"is display. |
Operating environment : | Temperature (0C to 40C), humidity<80%RH. |
Storage environment: | Temperature (-10℃ to 50℃),humidity<80%RH. |
Power: | 2pcs 1.5V AAA 7# battery. |
Dimension: | 185(L)X93(W)X35(H)mm. |
Weight: | Approx. 290g(including battery). |
Accessories: | manual, gift box ,holster ,TP01 temperature probe, test leads and 2pcs 1.5V battery. |
I/p Impedance:400mv range>40MΩother range:10MΩ. Overload protection:1000V DC or 700V AC peak value. |
I/p impedance:400mv range>40MΩ,other range:10MΩ Overload protection:1000V DC or 700V AC peak value. Frequency response:750V range:40~100Hz, other range: 40~400Hz. Displaying:sinewave RMS(average value response) | ||||||||||||||||||||||||||||||||||||||||||
Max. measuring volt drop: 400mV under mA range, 200mV under A range... Max. input current: 20A(less than 15sec.).. Overload protection: 0.5A/250V fuse, 13A/250V fuse... |
Max. measuring volt drop: 400mV under mA range, 200mV under A range.... Max. input current: 20A(less than 15sec.).. Overload protection: 0.5A/250V fuse, 13A/250V fuse... Frequency response: 40~100Hz under 10A range, 40ˇ«400Hz at other range.... | ||||||||||||||||||||||||||||||||||||||||||
Open circuit voltage:400mV... Overload protection: 250V DC/AC peak value.. |
Overload protection: 250V DC/AC peak value.. WARNING: do not input any voltage at this range! When measuring, the capacitor should be completely released and the power must be turned off.... | ||||||||||||||||||||||||||||||||||||||||||
INPUT SENSOR:0.7V。 Overload protection: 250V DC/AC peak value |
Overload protection: 250V DC/AC peak valuee.. WARNING: do not input any voltage at this range... Thermocouple: K type.. |